Bitumen Emulsion
1. RS-1 / RS-2
Rapid Setting Emulsion Grade RS-1 is specially recommended for tack coat application. It is also recommended for Seal Coat (Type 2)
Application areas: Tack Coat
| Type of Surface | Rate Of Spray(kg/10m2) |
| Bituminous Surface | 2 to 3 |
| Granular Surface treated with primer | 2.5 to 3 |
| Cement concrete pavement | 3 to 3.5 |
2. SS-1 / SS-2
Slow Setting Grade emulsion for application of Prime Coat. It takes a long time to form continuous adhesion film without any stripping.
Application areas: Prime Coat - Pothole Repair
| Type of Surface | Rate Of Spray(kg/10m2) |
| Low porosity (mechanically stabilized soil base, lime/cement stabilized soil and lime cement base) | 2 to 3 |
| High porosity (Gravel base crusher run macadam (CRM) and Crushed rock base) | 2.5 to 3 |
| Cement concrete pavement | 3 to 3.5 |
3. Cold Mix
Cold Mix Emulsions are customized emulsions. They are typically customized for working for OGPC, Seal Coat, Sand Seal, SDBC, BM, MSS, Slurry Seal, Micro Surfacing and Patch Repair Work. Cold mixes made with emulsions provide users with greater flexibility compared to the hot mix alternatives, which must be kept hot and bring additional costs when work is delayed. A Cold mix is defined as a mixture of bitumen emulsion and aggregate that is mixed together at ambient temperature. Bitumen emulsion being liquid at room temperature, there is no need to heat or dry the mineral aggregate. Cold mix is useful in the areas, where there is long distance between the job site and plant and temperature of climate is low and moderate ( <40 Degree). The versatility of cold mix allows it to be mixed in place at the job site as well as at the plant site and then transported to the job site.
4. MS
A medium Setting Emulsion is used for Premix carpeting, Pothole repairing and tack coat. It can be used for road mixes with coarse aggregate for surface dressing and penetration macadam.