Industrial Bitumen
85/25
Industrial grade bitumen is also known as blown bitumen. This is obtained by blowing air into hot bitumen at high temperatures (normally beyond 180 Degree). Blowing hot air into bitumen at high temperatures results in structural changes in bitumen. Esters are formed in this process and these esters link up two different molecules and higher molecular weight material increases drastically. In the process the asphaltene content is increased which in turn results in higher softening points and very low penetration number. Industrial grade bitumen is used in industrial applications and in water proofing, tarfelting etc.
90/15
At the bitumen production reactor, during the air acting, the mixture of the two Vacuum Bottom (VB) and Vacuum Silas (VS) feedstock is put under a special degree of pressure and temperature between 200-300˚C of which the hydrogen atoms content in bitumen molecular oxidize to oxygen of air, and obtains with higher hydrocarbons polymerization reaction that has lower penetration and higher softening points than the primary pure bitumen. This kind of bitumen 90/15 has the softening point of 90 and permeability of 15.
Patch Fix
PATCH FIX is an Instant Pothole Repair Solution particularly designed for Quick Repair of Potholes any time anywhere in an easiest way. PATCH FIX has been developed based on Cold Mix Technology. It is manufactured with the blend of Customize Bitumen Emulsion, High grade additives, solvent & fine quality of aggregate which reinforce it to immediate bonding with existing surface in heavy traffic and extreme weather condition.